新聞資訊
Ti55鈦合金的熱壓縮變形及其本構方程
發布人：上海艾荔艾金屬材料有限公司m.85978597.cn
更新時間：2015-09-13
采用Gleebe-3800熱模擬實驗在變形溫度900~960 ℃、應變速率為0.001~10 s-1條件下進行Ti55鈦合金的熱壓縮變形實驗。
Ti55鈦合金的熱壓縮變形及其本構方程Hot compression deformation and its constitutive equation of Ti55 alloy
采用Gleebe-3800熱模擬實驗在變形溫度900~960 ℃、應變速率為0.001~10 s-1條件下進行Ti55鈦合金的熱壓縮變形實驗。結果表明：Ti55鈦合金的熱壓縮真應力—應變曲線表現為流變軟化的特點，當變形溫度降低或應變速率增加時，Ti55鈦合金的流變應力也隨之增加。通過對真應力—應變曲線的回歸分析，建立了Ti55鈦合金的流變應力本構方程，在本研究中的變形溫度與應變速率下，Ti55鈦合金的Zener-Hollomon參數Z= exp[3.926 7×105/(RT)] =A[sinh(5.107 5×105σ)]4.001 46。
The hot compression deformation behavior of Ti55 alloy was investigated by hot compression testing on Gleeble-3800 thermal simulator at the temperature range of 900-960 ℃ with the strain rate varying from 0.001 s-1to 10 s-1. The results indicate that the true stress—strain curves of Ti55 titanium alloy during hot compression show rheological softening characteristics. The flow stress increases when the deformation temperature decreases or the strain rate increases. Through the true stress—strain curve regression analysis, the flow stress constitutive equations of Ti55 titanium alloy is built and the Zener-Hollomon parameter of this alloy is Z= exp[3.926 7×105/(RT)] =A[sinh(5.107 5×105σ)]4.001 46.
以上資料由上海艾荔艾金屬材料有限公司提供，歡迎新老客戶來電洽購。
本文來自上海艾荔艾金屬材料有限公司http://m.85978597.cn，轉載請注明出處。