2E12鋁合金的高溫塑性變形流變應力行為
發布人：上海艾荔艾金屬材料有限公司m.85978597.cn
更新時間：2015-12-26
通過在Gleeble?l500熱模擬試驗機上進行等溫?zé)釅嚎s試驗，研究2E12鋁合金在變形溫度為300~500 ℃和應變速率為0.0l ~ l0 s?1條件下的流變應力行為，計算、推導出用包含Arrhenius項的Zener-Hollomon參數描述2E12合金高溫壓縮流變行為的表達式，并分析形變熱、變形溫度和應變速率等參數對流變應力的影響規律。
2E12鋁合金的高溫塑性變形流變應力行為Flow stress behavior of 2E12 aluminum alloy during?hot plastic deformation at high temperature通過在Gleeble?l500熱模擬試驗機上進行等溫?zé)釅嚎s試驗，研究2E12鋁合金在變形溫度為300~500 ℃和應變速率為0.0l ~ l0 s?1條件下的流變應力行為，計算、推導出用包含Arrhenius項的Zener-Hollomon參數描述2E12合金高溫壓縮流變行為的表達式，并分析形變熱、變形溫度和應變速率等參數對流變應力的影響規律。結果表明：應變速率和變形溫度對2E12合金的流變應力影響顯著，流變應力隨著溫度的升高而降低，隨著應變速率的提高而增大；在 ≥1 s?1時，形變熱導致流變應力降低，且幅度隨著應變速率的增大而增大，隨著變形溫度的升高而降低。
The flow stress behavior of a hot compressed 2E12 aluminum alloy was investigated by compression tests performed on Gleeble?1500 tester at strain rates ranging from 0.01 s?1?to 10 s?1?and temperatures ranging from 300 ℃ to 500 ℃. The expression for describing the rheological behavior of 2E12 alloy during hot compression process by Zener-Hollomon parameter including Arrhenius term was deduced. The influence of temperature rise caused by deformation, testing temperature and strain rate on the flow stress was analyzed. The results show that the flow stress of 2E12 alloy is greatly affected by strain rate and temperature. The flow stress of 2E12 alloy decreases with increasing the temperature and rises with increasing the strain rate. At ≥1 s?1, temperature rise caused by deformation results in reduced flow stress. The decrease of flow stress increases with increasing the strain rate and decreases with increasing the deformation temperature.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.