W-30Cu電接觸材料直流電接觸行為
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-29
采用水熱-共還原法制備W-30Cu(質量分?jǐn)?shù)，%)納米復合粉末，并通過冷壓制坯、真空燒結和包覆熱擠壓的工藝制備出納米W-30Cu電接觸材料，經擠壓后致密度達到98.82%，硬度和導電率分別為224HB和44%IACS。
W-30Cu電接觸材料直流電接觸行為Electrical contact behavior of W-30Cu contact material under direct current condition采用水熱-共還原法制備W-30Cu(質量分?jǐn)?shù)，%)納米復合粉末，并通過冷壓制坯、真空燒結和包覆熱擠壓的工藝制備出納米W-30Cu電接觸材料，經擠壓后致密度達到98.82%，硬度和導電率分別為224HB和44%IACS。利用JF04C型電接觸試驗機對其進行不同操作次數的電接觸性能測試實驗，利用掃描電鏡(SEM)、能譜(EDS)等方法分析電弧侵蝕后觸頭表面微觀形貌和元素分布，探討材料在直流電弧下的轉移機理。結果表明：直流電弧引起陽極材料轉移，Cu相向陰極轉移并在陰極沉積；材料轉移引起富Cu區和富W區的存在，同時產生孔洞、裂紋、珊瑚狀結構等多種電弧侵蝕形貌。接觸電阻介于0.60~0.73 mΩ，W-30Cu電接觸材料表現出良好的綜合電性能。
The W-30Cu electrical contact material was fabricated by cold isostatic pressing process, vacuum sintering and hot extrusion with W-30Cu nanocomposite powder that was prepared by hydrothermal-coreduction method. The relative density can reach 98.82%, the hardness is up to 224HB and conductivity is 44%IACS. In order to search the transformation mechanism of W-30Cu electrical contact material, some contact tests were carried out through JF04C electrical material testing system. Scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) were employed to observe the microstructure and element distribution in contact surface after arc erosion. The results show that the direct current (DC) arc causes the transferring of anode material and depositing on the cathode surface; the transfer of materials leads to the existing of rich W region and rich Cu region, as well as the generating of the special morphology of pores, cracks and coral-like structure. The W-30Cu electrical contact material has small contact resistance in the range of 0.60-0.73 mΩ, which shows better performance under DC condition.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.