預時效工藝對7020鋁合金顯微組織和應力腐蝕性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-06-03
7020鋁合金經470 ℃固溶1 h后分別進行自然時效0 h、168 h以及65 ℃預時效72 h、168 h，再進行(90 ℃，8 h)+(160 ℃，14 h)雙級時效。采用室溫拉伸、慢應變速率拉伸(SSRT)、掃描電鏡(SEM)、透射電鏡(TEM)研究預時效工藝對7020鋁合金的常溫拉伸性能、抗應力腐蝕性能與顯微組織的影響。
預時效工藝對7020鋁合金顯微組織和應力腐蝕性能的影響Effect of pre-aging on microstructure and stress corrosion resistance of 7020 aluminum alloy7020鋁合金經470 ℃固溶1 h后分別進行自然時效0 h、168 h以及65 ℃預時效72 h、168 h，再進行(90 ℃，8 h)+(160 ℃，14 h)雙級時效。采用室溫拉伸、慢應變速率拉伸(SSRT)、掃描電鏡(SEM)、透射電鏡(TEM)研究預時效工藝對7020鋁合金的常溫拉伸性能、抗應力腐蝕性能與顯微組織的影響。結果表明:經65 ℃、168 h預時效處理后，合金具有最高的抗拉強度Rm=397.4 MPa和最好的抗應力腐蝕性能ISSRT=-0.003; 65 ℃、72 h預時處理效和自然時效168 h后合金的抗拉強度和抗應力腐蝕性能相當，Rm、ISSRT分別為387.6 MPa、0.034和392.0 MPa、0.036;而直接雙級時效合金的抗拉強度和抗應力腐蝕性能最差，Rm、ISSRT為368.9 MPa、0.038。晶內析出相η′(MgZn2)的尺寸隨預時效時間的延長而減小，晶界析出相η(MgZn2)的斷續分布程度隨預時效時間延長而增大。
After solution heat treatment at 470℃ for 1h, the alloys were natural aged for 0 h or 168 h and pre-aged at 65 ℃ for 72 h or 168 h, respectively. And then, the two-step aging ((90 ℃, 8 h)+(160 ℃, 14 h)) was conducted on these alloys. The effect of pre-ageing treatment on the tensile properties, resistances to stress corrosion and microstructures of 7020 aluminum alloy was investigated by tensile test, slow strain rate tensile (SSRT) test, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). 7020 aluminum alloy aged at 65 ℃ for 168 h pre-ageing treatment has the highest tensile property Rm?of 397.4 MPa as well as the best stress corrosion resistance ISSRT?of -0.003. The tensile property and stress corrosion resistance of alloy pre-ageing treatment at 65 ℃ for 72 h are 387.6 MPa and 0.034. And it is comparable of that of natural aging 168h, with Rm?of 392.0 MPa and ISSRT?of 0.036. While the tensile property and stress corrosion resistance of alloy by direct two-step aging are the worst, with Rm?of 368.9 MPa and ISSRT?of 0.038. With the increase of the pre-aging time, the size of intragranular precipitates η′(MgZn2) inside grains decreases, the intermittent distribution degree of precipitates intragranular precipitates η′(MgZn2) inside grains decreases and the intermittent distribution degree of precipitates η(MgZn2) at the grain boundaries increases.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI
has been a reliable partner and supplier of sophisticated and high-quality
semi-finished products maed of alloys. In dialogue with our customers, we
optimise our products to meet the specific application requirements. AILIAI
develops the best alloy material solutions for current and future
challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For
more information on the alloys and services that we supply,?call
us?at
086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch
on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.